Multigauge 3000 Underwater Thickness Gauge

Ultrasonic Thickness Gauges

Tritex NDT Ltd

Unit 10, Mellstock Business Park, Higher Bockhampton,

Dorchester, Dorset, DT2 8QJ, United Kingdom.

t: +44 (0) 1305 257160 f: +44 (0) 1305 259573

e: sales@tritexndt.com w: www.tritexndt.com

website terms

simple . accurate . robust

Home About Us Testimonials Products Applications Technology Support Contact

Ultrasonic Thickness Gauges…

…that measure through coatings.

The Multigauge 3000 Underwater Thickness Gauge is a simple, robust ultrasonic thickness gauge designed for most common underwater thickness gauging applications. The gauge is pressure tested to 500m and has the option to transfer measurements to a surface display unit with the simple addition of a replacement end cap. It has been designed and built to survive extremely harsh conditions that exist in the offshore and underwater industries worldwide. The gauge uses multiple echo which means measurements can be easily taken without the need to remove coatings and the large bright LED display ensures the display can be seen by the diver, even in poor visibility.

The gauge is equipped with IPR (Intelligent Probe Recognition), which automatically adjusts settings in the gauge for enhanced performance and AMVS (Automatic Measurement Verification System) to ensure only true measurements are displayed, even on the most heavily corroded metals.

multigauge 3000 underwater

Sound Velocity Range:

From 1000 m/s to 8000 m/s (0.0394 in/µs to 0.3150 in/µs)

Probes:

Single crystal soft faced - 2.25 MHz, 3.5 MHz & 5 MHz

Measurement Range:

1 - 250 mm (0.04” - 10”) depending on probe used

Probe Sizes:

13 mm (0.5”) & 19 mm (0.75”)

Resolution:

0.1 mm (0.005”) or 0.05 mm (0.002”)

Accuracy:

± 0.1 mm (0.005”) or ± 0.05 mm (0.002”)

Display:

Large red 4 character 7 segment LED

Depth Rating:

500 metres

Batteries:

1 x rechargeable 7.2V 2.3Ah NiMH battery pack

Battery Life:

55 Hours on one fast charge of 2 hours

Gauge Dimensions:

235 mm x 80 mm (9.25” X 3.15”)

Gauge Weight:

1110 g (38.85 ounces) fully assembled

Environmental:

RoHS and WEEE compliant

Operating Temp.:

-10°C to +50°C (14°F to 122°F)

Storage Temp.:

-10°C to +60°C (14°F to 140°F)

“It is a sensitive unit and works very well! ” Red Sea Diving - Egypt

Multigauge 3000 gauge with integral battery, standard 2.25Mhz 13mm probe, spare membranes, membrane oil, 15mm test block, membrane key, spare 'O' rings, Molykote grease, nose cone release bar, battery charger with appropriate power lead, manual, calibration certificate and Peli carry case

Extremely large 10mm display

Ignores coatings using multiple echo

Large 10mm display

for good visibility in poor visibility applications

Pressure tested

to 500m

Easy to use

Intelligent Probe

Recognition (IPR)

Automatic Measurement Verification (AMVS)

Integral battery with 55 hour runtime on one fast charge. No need for a spare battery.

No fuss upgrade option to a topside repeater

Easy calibration with

menu driven buttons

Multigauge 3000 Underwater Thickness Gauge

No zeroing required

Rugged, durable and robust

Bright yellow

to aid use

specification:

kit contents:

topside repeater options

surface display unit:

communicator software:

Displays the measurements that the diver is getting on the surface and allows two way communication.

Allows datalogging on a PC or laptop using templates which can be setup to store data in a grid, string or combination of both.

features:

"As a diver and engineer, I am very satisfied with the Tritex gauge...especially because the Tritex is easy to use...easy maintenance...robust and has a large and easy to read display"
Niras - Denmark